聚氨醋改性后的單組分聚氨酯密封膠的低溫性...
2026-01-15
推薦新聞
路用MS密封膠的性能評價標準與測試方法
2026-01-15
裂縫修補的環氧丁基防水嵌縫膠的老化過程
2026-01-15
路用MS密封膠的材料自身性能研究
2026-01-14
丁基防水嵌縫膠的性能研究
2026-01-14
聚氨酯密封膠硬度實驗方法
- 發布時間 : 2023-3-15 12:20:58
- Views:
(Summary description)Customized SILICONE STRUCTURAL SEALANT from China manufacturer refers to the adhesive with high strength, can bear large load, aging resistance, fatigue resistance and corrosion resistance, and has stable performance within the expected life. It is suitable for bearing the bonding of strong structural parts. Non structural adhesive has low strength and poor durability. It can only be used for bonding, sealing and fixing of ordinary and temporary properties, and cannot be used for structural adhesive bonding. NEUTRAL SILICONE WETHERPROOF SEALANT from China manufacturer is a structural adhesive with waterproof function. Silicone glue refers to the adhesive based on silicone rubber. According to different functions, it can be divided into structural adhesive, potting adhesive, sealant, thermal conductive adhesive, flame retardant adhesive and so on.
聚氨酯密封膠硬度實驗方法
(Summary description)Customized SILICONE STRUCTURAL SEALANT from China manufacturer refers to the adhesive with high strength, can bear large load, aging resistance, fatigue resistance and corrosion resistance, and has stable performance within the expected life. It is suitable for bearing the bonding of strong structural parts. Non structural adhesive has low strength and poor durability. It can only be used for bonding, sealing and fixing of ordinary and temporary properties, and cannot be used for structural adhesive bonding. NEUTRAL SILICONE WETHERPROOF SEALANT from China manufacturer is a structural adhesive with waterproof function. Silicone glue refers to the adhesive based on silicone rubber. According to different functions, it can be divided into structural adhesive, potting adhesive, sealant, thermal conductive adhesive, flame retardant adhesive and so on.
- 發布時間 : 2023-3-15 12:20:58
- Views:
Information
按照GB/T531.1-2008硬度試驗辦法，將3種聚氨酯密封膠在23℃溫度，50%RH濕度環境下放置24h，然后在綜合硬度測試儀上進行單層試樣硬度測試。技術要求聚氨酯密封膠硬度為(50080) Shore A。試驗結果如表5所示，聚氨酯密封膠的硬度隨著玻璃微珠填充比例的增加而增大，這主要是因為玻璃微珠是一種硬質的剛性球體，填充量增加會增大聚氨酯密封膠的硬度。膠體硬度表征了材料抵抗局部塑形變形、壓痕或劃痕的能力，提高聚氨酯密封膠的硬度可有效抵抗因飯金變形導致的聚氨酯密封膠變形量，避免膠體開裂問題，改善摩擦損耗性能。因此，聚氨酯密封膠的選型需要綜合考量硬度和輕量化指標，在滿足技術要求硬度的同時，可選擇輕量化效果最優的低密度型聚氨酯密封膠品。www.kubee.cn
Scan the QR code to read on your phone
上一篇: MS密封膠儲存穩定性
下一篇: 硅烷改性聚氨酯密封膠力學性能
上一篇: MS密封膠儲存穩定性
下一篇: 硅烷改性聚氨酯密封膠力學性能
+86-
13573398725
sdyuantai@163.com
搜索