聚氨醋改性后的單組分聚氨酯密封膠的低溫性...
2026-01-15
推薦新聞
路用MS密封膠的性能評價標準與測試方法
2026-01-15
裂縫修補的環氧丁基防水嵌縫膠的老化過程
2026-01-15
路用MS密封膠的材料自身性能研究
2026-01-14
丁基防水嵌縫膠的性能研究
2026-01-14
聚醚三醇與二醇配比對聚氨酯密封膠性能的影響
- 發布時間 : 2023-4-8 17:07:39
- Views:
(Summary description)Customized SILICONE STRUCTURAL SEALANT from China manufacturer refers to the adhesive with high strength, can bear large load, aging resistance, fatigue resistance and corrosion resistance, and has stable performance within the expected life. It is suitable for bearing the bonding of strong structural parts. Non structural adhesive has low strength and poor durability. It can only be used for bonding, sealing and fixing of ordinary and temporary properties, and cannot be used for structural adhesive bonding. NEUTRAL SILICONE WETHERPROOF SEALANT from China manufacturer is a structural adhesive with waterproof function. Silicone glue refers to the adhesive based on silicone rubber. According to different functions, it can be divided into structural adhesive, potting adhesive, sealant, thermal conductive adhesive, flame retardant adhesive and so on.
聚醚三醇與二醇配比對聚氨酯密封膠性能的影響
(Summary description)Customized SILICONE STRUCTURAL SEALANT from China manufacturer refers to the adhesive with high strength, can bear large load, aging resistance, fatigue resistance and corrosion resistance, and has stable performance within the expected life. It is suitable for bearing the bonding of strong structural parts. Non structural adhesive has low strength and poor durability. It can only be used for bonding, sealing and fixing of ordinary and temporary properties, and cannot be used for structural adhesive bonding. NEUTRAL SILICONE WETHERPROOF SEALANT from China manufacturer is a structural adhesive with waterproof function. Silicone glue refers to the adhesive based on silicone rubber. According to different functions, it can be divided into structural adhesive, potting adhesive, sealant, thermal conductive adhesive, flame retardant adhesive and so on.
- 發布時間 : 2023-4-8 17:07:39
- Views:
Information
聚醚三醇能夠提高材料的強度和回彈性，聚醚二醇有利于增加材料的斷裂伸長率。在應用中，若聚氨酯密封膠模量過高，混凝土接縫發生較大的變形時，由于聚氨酯密封膠的本體拉伸強度過高，易導致聚氨酯密封膠在混凝土接縫界面發生粘接破壞。而低模量聚氨酯密封膠，其本體拉伸強度低于界面粘接強度，不會發生界面脫粘。在本研究中，固定R值為2. 5，固化劑采用B2配方，考察了預聚體中EP-330NG與DL-1000D摩爾比對聚氨酯密封膠性能的影響，結果見表3。
由表3可知，隨著預聚體中聚醚三醇含量降低，聚氨酯密封膠的拉伸強度下降，斷裂伸長率提高，拉伸模量降低。因此，通過調整n w2可以調節聚氨酯密封膠的強度和模量。聚氨酯密封膠的表干時間由4. 5 h縮短至3. 6 h,這是由于預聚體的NCO質量分數由4. 6%提高至5. 2%，所以固化變快。www.kubee.cn
Scan the QR code to read on your phone
上一篇: MS密封膠拉伸強度和斷裂伸長率
上一篇: MS密封膠拉伸強度和斷裂伸長率
+86-
13573398725
sdyuantai@163.com
搜索