推薦新聞
裂縫修補的環氧丁基防水嵌縫膠的老化過程
路用MS密封膠的材料自身性能研究
丁基防水嵌縫膠的性能研究
溫度太高與太低均不宜進行MS密封膠的施工
- 發布時間 : 2023-4-10 18:19:23
- Views:
(Summary description)Customized SILICONE STRUCTURAL SEALANT from China manufacturer refers to the adhesive with high strength, can bear large load, aging resistance, fatigue resistance and corrosion resistance, and has stable performance within the expected life. It is suitable for bearing the bonding of strong structural parts. Non structural adhesive has low strength and poor durability. It can only be used for bonding, sealing and fixing of ordinary and temporary properties, and cannot be used for structural adhesive bonding. NEUTRAL SILICONE WETHERPROOF SEALANT from China manufacturer is a structural adhesive with waterproof function. Silicone glue refers to the adhesive based on silicone rubber. According to different functions, it can be divided into structural adhesive, potting adhesive, sealant, thermal conductive adhesive, flame retardant adhesive and so on.
溫度太高與太低均不宜進行MS密封膠的施工
(Summary description)Customized SILICONE STRUCTURAL SEALANT from China manufacturer refers to the adhesive with high strength, can bear large load, aging resistance, fatigue resistance and corrosion resistance, and has stable performance within the expected life. It is suitable for bearing the bonding of strong structural parts. Non structural adhesive has low strength and poor durability. It can only be used for bonding, sealing and fixing of ordinary and temporary properties, and cannot be used for structural adhesive bonding. NEUTRAL SILICONE WETHERPROOF SEALANT from China manufacturer is a structural adhesive with waterproof function. Silicone glue refers to the adhesive based on silicone rubber. According to different functions, it can be divided into structural adhesive, potting adhesive, sealant, thermal conductive adhesive, flame retardant adhesive and so on.
- 發布時間 : 2023-4-10 18:19:23
- Views:
MS密封膠施工溫度要求在5℃一40℃范圍內。基材表面溫度過高可能造成固化反應速度過快,產生的水分子物質來不及遷移出膠體表面在內部聚集形成氣泡,破壞膠縫表面的美觀;溫度過低固化過程顯著延長,受溫差影響熱脹冷縮造成外觀走形。溫度太高與太低均不宜進行MS密封膠的施工,容易造成MS密封膠在固化過程一直處于拉伸或壓縮狀態,固化后內部應力超過設計的位移能力造成內聚或粘結破壞,導致密封失效產生滲漏。
接縫密封必須使用閉孔型聚乙烯類或開孔型聚氨醋類泡沫棒作襯墊,避免MS密封膠造成三面粘結并有效地控制接縫中MS密封膠嵌人深度和形狀,使MS密封膠完全潤濕兩側基材表面,讓MS密封膠發揮最佳的位移能力。泡沫棒襯墊未按規范施工可能破壞膠縫表面的美觀,泡沫棒填塞應平直,并按設計要求預留打膠厚度。泡沫棒太大容易被拉得太緊時,密封后回縮拖動MS密封膠,使不規則的長條狀向外凸出,影響觀感。www.kubee.cn
Scan the QR code to read on your phone
+86-
13573398725
sdyuantai@163.com
